Specifications of Silicon Bronze Sheet/Plate:
1) Grade: C65100, C65500, QSi3-1,QSi1-3, C65800, etc.
2) Nominal Chemicals: Copper 95.8%, Silicon 3.1%, Manganese 1.1%
3) Thickness: 0.025mm - 4.0mm, or custom
4) Width: 36mm - 48mm, or custom
5) Length: 96mm - 120mm, or custom
6) Machinability: 30, Electrical Conductivity 17% IACS
7) Average Physical Properties: Tensile: 60000 psi; Yield: 25000 psi; Hardness: B60; Elongation: 50%
Chemical Composition:
(%max., unless shown as range or min.)
Parameters of Silicon Bronze Sheet/Plate:
Physical Properties:
Mechanical Properties:
Features of Silicon Bronze Sheet/Plate:
1) Good to excellent corrosion resistance
2) Excellent hot and cold workability
3) Fabricated by blanking, drawing, forming and bending, heading and upsetting
4) Hot forging and pressing, roll threading and knurling, shearing, squeezing, and swaging
Applications of Silicon Bronze Sheet/Plate:
1) Consumer: Sculpture
2) Aircraft: Hydraulic pressure lines
3) Electrical: Pole line hardware, motors, rotor bar
4) Hardware: Bolts, burrs, butts, clamps, cotter pins, hinges, marine hardware,
nails, nuts, pole line hardware, screws
5) Industrial: Bearing plates, bushings, cable, channels, chemical equipment,
heat exchanger tubes, kettles, piston rings, tanks, rivets, screen cloth and wire, screen plates, shafting
6) Marine: Propeller shafts, hardware, propeller shafts, etc.
EO Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
1) EO Metal Standard
2) Customization
Premium Quality
Fast Delivery
Small Order Acceptable
Wonderful Teamwork
Spot delivery, including delivering small batches of goods
Provide wide-range and complete materials series products
Our application technology expert provide the best material and recommendation
One-stop service
